Форум - светотехника, светодизайн, светодиоды, лампы, светильники, электрика  

Вернуться   Форум - светотехника, светодизайн, светодиоды, лампы, светильники, электрика > Светотехника, светодизайн и коммерция > Светодизайн.

Светодизайн. Всё, что связано со светодизайном. Проекты освещения, Дизайн-проекты... Методики работы со светом в Photoshop, 3D Studio Max, Lightscape. Эстетическая сторона светового дизайна

Ответ
 
Опции темы Опции просмотра
Старый 16.03.2017, 18:56   #361
T0L1K
Мастер
 
Регистрация: 08.02.2014
Адрес: Санкт-Петербург
Сообщений: 102
Вес репутации: 198
T0L1K is a splendid one to beholdT0L1K is a splendid one to beholdT0L1K is a splendid one to beholdT0L1K is a splendid one to beholdT0L1K is a splendid one to beholdT0L1K is a splendid one to beholdT0L1K is a splendid one to beholdT0L1K is a splendid one to beholdT0L1K is a splendid one to beholdT0L1K is a splendid one to beholdT0L1K is a splendid one to behold
Lightbulb Re: DIALux evo

Немного про EVO и BIM.
В версии 7.0 доступен ИМПОРТ проектов созданных с применением BIM. Ево понимает такие вещи как стены,перекрытия, объекты, двери и окна. С текстурами пока проблемы так же как (вроде, но это не точно) со светильниками. Экспорт проектов будет доступен в будущем. Но uld файлы светильников уже отвечают всем требованиям технологии BIM.
Появилась возможность производить упрощенный расчет без учета отражений и\или без учета объектов.
Доступны американские системы единиц.
В 7.1 скорей всего будет возможность РАЗДЕЛЬНОГО расчета помещений, т.е. видимо каждая сцена для своего помещения как в обычном диалюксе.
В 7.1 точно не будет возможности создания видеороликов.
7.0 выйдет 26-30марта, 7.1 в июле-сентябре.

Вроде ничего не забыл
T0L1K вне форума   Ответить с цитированием
Старый 17.03.2017, 12:33   #362
alkrymov
Высший разум
 
Аватар для alkrymov
 
Регистрация: 06.03.2009
Адрес: Москва
Сообщений: 1,312
Вес репутации: 682
alkrymov has a brilliant futurealkrymov has a brilliant futurealkrymov has a brilliant futurealkrymov has a brilliant futurealkrymov has a brilliant futurealkrymov has a brilliant futurealkrymov has a brilliant futurealkrymov has a brilliant futurealkrymov has a brilliant futurealkrymov has a brilliant futurealkrymov has a brilliant future
По умолчанию Re: DIALux evo

Бета-тестер?)
__________________
НИТПУ, кафедра Лазерной и Световой Техники

В России уровень маразма, превышает уровень жизни!!!
alkrymov вне форума   Ответить с цитированием
Старый 18.03.2017, 22:33   #363
T0L1K
Мастер
 
Регистрация: 08.02.2014
Адрес: Санкт-Петербург
Сообщений: 102
Вес репутации: 198
T0L1K is a splendid one to beholdT0L1K is a splendid one to beholdT0L1K is a splendid one to beholdT0L1K is a splendid one to beholdT0L1K is a splendid one to beholdT0L1K is a splendid one to beholdT0L1K is a splendid one to beholdT0L1K is a splendid one to beholdT0L1K is a splendid one to beholdT0L1K is a splendid one to beholdT0L1K is a splendid one to behold
По умолчанию Re: DIALux evo

Неа) У диала был вебинар с обзором ево 7. А вот на тест или просто обзор прогу они не дали(
T0L1K вне форума   Ответить с цитированием
Старый 21.03.2017, 02:19   #364
Anna Denisova
Ученик
 
Регистрация: 13.11.2015
Адрес: Санкт-Петербург
Сообщений: 23
Вес репутации: 216
Anna Denisova is a splendid one to beholdAnna Denisova is a splendid one to beholdAnna Denisova is a splendid one to beholdAnna Denisova is a splendid one to beholdAnna Denisova is a splendid one to beholdAnna Denisova is a splendid one to beholdAnna Denisova is a splendid one to beholdAnna Denisova is a splendid one to beholdAnna Denisova is a splendid one to beholdAnna Denisova is a splendid one to beholdAnna Denisova is a splendid one to behold
По умолчанию Re: DIALux evo

Ссылка на видео c вебинара по DIALux Evo 7
[Только зарегистрированные пользователи могут видеть ссылки. Регистрация!]
может кому будет интересно
Anna Denisova вне форума   Ответить с цитированием
Старый 31.03.2017, 12:54   #365
izbrodin
Знаток
 
Регистрация: 28.05.2015
Сообщений: 30
Вес репутации: 0
izbrodin нет репутации
По умолчанию Re: DIALux evo

У меня вопрос, специально разработчики отключили на расчетной поверхности, фиктивные цвета/изолинии/числовые значения при расчете освещенности на камеру? Или это баг, который можно как то обойти?
izbrodin вне форума   Ответить с цитированием
Старый 31.03.2017, 17:48   #366
T0L1K
Мастер
 
Регистрация: 08.02.2014
Адрес: Санкт-Петербург
Сообщений: 102
Вес репутации: 198
T0L1K is a splendid one to beholdT0L1K is a splendid one to beholdT0L1K is a splendid one to beholdT0L1K is a splendid one to beholdT0L1K is a splendid one to beholdT0L1K is a splendid one to beholdT0L1K is a splendid one to beholdT0L1K is a splendid one to beholdT0L1K is a splendid one to beholdT0L1K is a splendid one to beholdT0L1K is a splendid one to behold
По умолчанию Re: DIALux evo

А какая версия ЕВО? Я проверил на 6.2 path2 в отчете изолинии и пр есть (как при создании плоскости для камеры так и просто камеры)
T0L1K вне форума   Ответить с цитированием
Старый 03.04.2017, 11:52   #367
izbrodin
Знаток
 
Регистрация: 28.05.2015
Сообщений: 30
Вес репутации: 0
izbrodin нет репутации
По умолчанию Re: DIALux evo

В отчете да, есть все, но в самом проекте не отображается, на более ранних версий отображалось.Версия Dialux evo 6.2.
При чем не отображается именно освещенность направленная на камеру. Остальные отображаются нормально.
izbrodin вне форума   Ответить с цитированием
Старый 05.04.2017, 20:57   #368
alkrymov
Высший разум
 
Аватар для alkrymov
 
Регистрация: 06.03.2009
Адрес: Москва
Сообщений: 1,312
Вес репутации: 682
alkrymov has a brilliant futurealkrymov has a brilliant futurealkrymov has a brilliant futurealkrymov has a brilliant futurealkrymov has a brilliant futurealkrymov has a brilliant futurealkrymov has a brilliant futurealkrymov has a brilliant futurealkrymov has a brilliant futurealkrymov has a brilliant futurealkrymov has a brilliant future
По умолчанию Re: DIALux evo

Вышел таки 7.0:
Цитата:
Dear DIALux user,

We released a new DIALux evo version 7.0. We wish you lots of fun and success in your lighting planning!

In the following you find an overview of the new features and the improvements in this version:

Bugfixes:
• The visualization of floor recessed light outputs has been improved.
• Workplanes and daylight factor calculation surfaces are now included in the room summary printout.
• An error during manipulation of polygonal roofs has been solved.
• A warning has been solved, that occured when removing objects from a project.
• An error in copying buildings and storeys has been solved.
• The documented specific connection load (W/m²) is now calculated based on the room's floor area.

New functions:
• IFC import: Entire buildings and outdoor areas can now be imported automatically from IFC project files, without the need of manual contruction.
• DWG drawings can now be included in printouts as a cutout of the required part.
• The room summary's layout has been improved. In addition, there is the option of a simple and a detailed luminaire part list. By default, the simplified luminaire part list will be shown in the room summary.
• A luminaire position plan is now included in the printouts in addition to a configurable reference coordinate system for outdoor scenes.
• Calculation time can now be reduced by use of new calculation parameters as there are: "Only direct lighting without reflections", "Calculation without furniture" and "Simplified indirect illumination of furniture and objects". Active parameters will be documented in the printouts and the results overview.
• Parts of calculation planes can be excluded from calculation and result interpretation by a cutout function. This is available for calculation grids, workplanes, task areas, room main surfaces, ASR A3.4 workstation areas and EN 12464-1 visual task areas.
• Article numbers have been added to the luminaire catalog of road lighting.
• Secifications according to IESNA Lighting Handbook (10th edition) have been added to the standards database.
• The set aim angles of adjustable luminaires can now be exported as *.csv file.

Improvements of existing features:
• Loading DIALux projects is no longer interrupted by message boxes.
• The printout page conficuration has been removed from the bottom area of the screen and is now available as overlay, making the configuration more convenient. The current page will be automatically re-rendered as soon as the configuration page is closed.
• All product data sheets are now be grouped below one node in the printout tree. This significantly reduces the size of the tree and gives a far better orientation.
• Unavailable pages are now hidden in the tree instead of showing them as disabled. This also reduces the printout tree size without losing information or functionality.
• The pages for results overview, isolines, false colors, value chart and value grid are now combined in one page. There is one page per calculation plane and parameter. The desired result visualizations can be selected in the page configuration. All visualizations are activated by default.
• The option to show DWG drawing has been removed from the display options and placed next to the view navigation bar. Additional drawings can be loaded from this place. The DWG control has been removed from the site, building and storey construction tools.
• Result value grids and isolines are now been displayed automatically after calculation a light scene. This function can be activated and deactivated in the application settings, in the section "CAD", if needed.
• The default value range of isolines is now automatically set based on the calculated lux levels.
• The calculation time of isolines, false colors and value grids for the CAD window is significantly reduced due to parallelization.
• The user interface for configuration of isolines has been redesigned. User defined value scales can now be saved and reused.
__________________
НИТПУ, кафедра Лазерной и Световой Техники

В России уровень маразма, превышает уровень жизни!!!
alkrymov вне форума   Ответить с цитированием
Старый 06.04.2017, 09:25   #369
aVeter
Гуру
 
Аватар для aVeter
 
Регистрация: 16.11.2011
Адрес: Москва
Сообщений: 372
Вес репутации: 402
aVeter has a brilliant futureaVeter has a brilliant futureaVeter has a brilliant futureaVeter has a brilliant futureaVeter has a brilliant futureaVeter has a brilliant futureaVeter has a brilliant futureaVeter has a brilliant futureaVeter has a brilliant futureaVeter has a brilliant futureaVeter has a brilliant future
По умолчанию Re: DIALux evo

The set aim angles of adjustable luminaires can now be exported as *.csv file.

где эта функция находится?
aVeter вне форума   Ответить с цитированием
Старый 10.04.2017, 17:49   #370
alkrymov
Высший разум
 
Аватар для alkrymov
 
Регистрация: 06.03.2009
Адрес: Москва
Сообщений: 1,312
Вес репутации: 682
alkrymov has a brilliant futurealkrymov has a brilliant futurealkrymov has a brilliant futurealkrymov has a brilliant futurealkrymov has a brilliant futurealkrymov has a brilliant futurealkrymov has a brilliant futurealkrymov has a brilliant futurealkrymov has a brilliant futurealkrymov has a brilliant futurealkrymov has a brilliant future
По умолчанию Re: DIALux evo

[Только зарегистрированные пользователи могут видеть ссылки. Регистрация!]
__________________
НИТПУ, кафедра Лазерной и Световой Техники

В России уровень маразма, превышает уровень жизни!!!
alkrymov вне форума   Ответить с цитированием
Старый 25.04.2017, 09:19   #371
mki808
Новичок
 
Регистрация: 25.04.2017
Сообщений: 2
Вес репутации: 0
mki808 нет репутации
По умолчанию Re: DIALux evo

Добрый день! подскажите пожалуйста как сделать помещение внутри другого помещения (по типу "острова"-перегородки не соприкасаются), чтобы диалюкс при расчете считал их независимыми?
mki808 вне форума   Ответить с цитированием
Старый 25.04.2017, 10:58   #372
Valletos
Гуру
 
Регистрация: 12.04.2012
Сообщений: 293
Вес репутации: 593
Valletos has a brilliant futureValletos has a brilliant futureValletos has a brilliant futureValletos has a brilliant futureValletos has a brilliant futureValletos has a brilliant futureValletos has a brilliant futureValletos has a brilliant futureValletos has a brilliant futureValletos has a brilliant futureValletos has a brilliant future
По умолчанию Re: DIALux evo

Цитата:
Сообщение от mki808 Посмотреть сообщение
Добрый день! подскажите пожалуйста как сделать помещение внутри другого помещения (по типу "острова"-перегородки не соприкасаются), чтобы диалюкс при расчете считал их независимыми?
Об этом вопрос?
[Только зарегистрированные пользователи могут видеть ссылки. Регистрация!]
Valletos вне форума   Ответить с цитированием
Старый 25.04.2017, 13:04   #373
mki808
Новичок
 
Регистрация: 25.04.2017
Сообщений: 2
Вес репутации: 0
mki808 нет репутации
По умолчанию Re: DIALux evo

Valletos спасибо! то что надо
mki808 вне форума   Ответить с цитированием
Старый 11.05.2017, 12:50   #374
Ro-Man
Новичок
 
Регистрация: 17.03.2017
Сообщений: 1
Вес репутации: 0
Ro-Man нет репутации
По умолчанию Re: DIALux evo

Здравствуйте! Я человек новый и в светопроектировании и на форуме, поэтому сразу прошу извинить за возможные глупости с моей стороны, если такие последуют. У меня вопрос, если можно задавать тут.

Пользуюсь Диалюкс ево 6. Вчера вдруг в "Документации" и в "Дереве проекта" перемешались пункты. До этого они упорядочивались по алфавиту, а теперь как попало, без всякой логики. И если в "Дереве проекта" порядок пунктов для меня не важен, то бардак в "Документации" не устраивает никого. Подскажите пожалуйста, если кто знает, как это исправить. С ног сбился, везде щелкал, но что можно сделать, так и не нашел.

Попутно задам еще один связанный вопрос. Можно ли в Документации не только включать/выключать пункты, которые необходимо отображать, но и самому редактировать оформление? Хочется не просто выбирать из готовых шаблонов или создавать свои, но и немного менять вид каждого листа соответствующего раздела. Может быть, не напрямую в программе, а путем редактирования каких-нибудь файлов?
Ro-Man вне форума   Ответить с цитированием
Старый 21.08.2017, 12:16   #375
alkrymov
Высший разум
 
Аватар для alkrymov
 
Регистрация: 06.03.2009
Адрес: Москва
Сообщений: 1,312
Вес репутации: 682
alkrymov has a brilliant futurealkrymov has a brilliant futurealkrymov has a brilliant futurealkrymov has a brilliant futurealkrymov has a brilliant futurealkrymov has a brilliant futurealkrymov has a brilliant futurealkrymov has a brilliant futurealkrymov has a brilliant futurealkrymov has a brilliant futurealkrymov has a brilliant future
По умолчанию Re: DIALux evo

Вышел DIALux 7.1

Dear DIALux user,

We released a new DIALux evo version 7.1. We wish you lots of fun and success in your lighting planning!

In the following you find an overview of the new features and the improvements in this version:

Installation:
The x64 and x86 versions are now installed parallel (on 32bit systems only x86)


Bugfixes:
The representation of the GR values in the result monitor was revised.
Several minor errors in editing objects in the CAD have been fixed.
An error while editing the floor contours in combination with the UNDO function has been fixed.
Fixed some problems with corrupt luminaire data.
Fixed a problem with displaying rooms after importing IFC files.


New functions:
The lengths of manipulators are displayed in the CAD during construction.
The manipulators of auxiliary grid and the texture scaling now display the distances of the individual elements in the CAD.
The lengths and distances of manipulators can be edited directly in the CAD via "TAB"-key.
evo now distinguishes between two calculation types "Standard" and "Fast".
In "Fast" mode, only the visible part of the building calculated.
The entire calculation pipeline has been revised and accelerated. The calculation times are thereby reduced.
In addition, the calculation can be limited to calculation surfaces using the setting „Calculate surfaces only".
Min, max, average value and uniformity of luminance are now available in the output.


Improvements of existing features:
Output: In the room summary the floor based room height was replaced by the clear room height.
The graphical interface has been revised and improved. The tools are more compact and require less space.
The manufacturer selection can no longer be closed.
Canceling the calculation is now faster.
Loading and saving complex projects has been speeded up.
__________________
НИТПУ, кафедра Лазерной и Световой Техники

В России уровень маразма, превышает уровень жизни!!!
alkrymov вне форума   Ответить с цитированием
Старый 21.10.2017, 15:09   #376
Rindella
Новичок
 
Регистрация: 21.10.2017
Сообщений: 1
Вес репутации: 0
Rindella нет репутации
По умолчанию Пропали стены в dialux evo

Здравствуйте, уважаемые коллеги!
Делаю проект в ево, здание полностью стеклянное (делаю из окон и фрагментов). В один момент все стены пропали. Помогите, пожалуйста, решить проблему

Последний раз редактировалось Rindella; 21.10.2017 в 15:11.
Rindella вне форума   Ответить с цитированием
Старый 21.10.2017, 23:40   #377
alkrymov
Высший разум
 
Аватар для alkrymov
 
Регистрация: 06.03.2009
Адрес: Москва
Сообщений: 1,312
Вес репутации: 682
alkrymov has a brilliant futurealkrymov has a brilliant futurealkrymov has a brilliant futurealkrymov has a brilliant futurealkrymov has a brilliant futurealkrymov has a brilliant futurealkrymov has a brilliant futurealkrymov has a brilliant futurealkrymov has a brilliant futurealkrymov has a brilliant futurealkrymov has a brilliant future
По умолчанию Re: DIALux evo

Исходя из опыта - когда в проекте много вырезов, окон, дверей и прочего, что влияет на конструктив здания, надо сохраняться по-чаще.
В 7.1 конечно намного лучше со стабильностью, но все равно вылетает либо вылазят непредвиденные баги.
__________________
НИТПУ, кафедра Лазерной и Световой Техники

В России уровень маразма, превышает уровень жизни!!!
alkrymov вне форума   Ответить с цитированием
Старый 07.11.2017, 13:11   #378
ese
Новичок
 
Регистрация: 28.02.2012
Сообщений: 4
Вес репутации: 0
ese нет репутации
По умолчанию Re: DIALux evo

Всем форумчанам привет.
Кто может подсказать как можно избавиться от зеленого значка ecrion, при выводе документации? гугл/яндекс ничего и близко не выдает.
Речь идет про зеленую штуку на картинке
[Только зарегистрированные пользователи могут видеть ссылки. Регистрация!]
ese вне форума   Ответить с цитированием
Старый 15.11.2017, 19:11   #379
knjaz
Мастер
 
Регистрация: 22.12.2007
Адрес: Тернополь, Украина
Сообщений: 238
Вес репутации: 460
knjaz has a brilliant futureknjaz has a brilliant futureknjaz has a brilliant futureknjaz has a brilliant futureknjaz has a brilliant futureknjaz has a brilliant futureknjaz has a brilliant futureknjaz has a brilliant futureknjaz has a brilliant futureknjaz has a brilliant futureknjaz has a brilliant future
По умолчанию Re: DIALux evo

в следующей сборке (к L&B'18) обещали сделать возможность подложки из картинки в 2D.
__________________
Lux ex Machina / UA
knjaz вне форума   Ответить с цитированием
Старый 23.01.2018, 17:20   #380
Shamil1982
Ученик
 
Регистрация: 14.07.2017
Сообщений: 10
Вес репутации: 0
Shamil1982 нет репутации
По умолчанию Re: DIALux evo

По прежнему куча косяков в EVO. Интересно, когда уже его допилят до приемлемого уровня?
Shamil1982 вне форума   Ответить с цитированием
Старый 24.01.2018, 15:23   #381
alkrymov
Высший разум
 
Аватар для alkrymov
 
Регистрация: 06.03.2009
Адрес: Москва
Сообщений: 1,312
Вес репутации: 682
alkrymov has a brilliant futurealkrymov has a brilliant futurealkrymov has a brilliant futurealkrymov has a brilliant futurealkrymov has a brilliant futurealkrymov has a brilliant futurealkrymov has a brilliant futurealkrymov has a brilliant futurealkrymov has a brilliant futurealkrymov has a brilliant futurealkrymov has a brilliant future
По умолчанию Re: DIALux evo

Конкретизировать можете?
__________________
НИТПУ, кафедра Лазерной и Световой Техники

В России уровень маразма, превышает уровень жизни!!!
alkrymov вне форума   Ответить с цитированием
Старый 26.01.2018, 12:38   #382
knjaz
Мастер
 
Регистрация: 22.12.2007
Адрес: Тернополь, Украина
Сообщений: 238
Вес репутации: 460
knjaz has a brilliant futureknjaz has a brilliant futureknjaz has a brilliant futureknjaz has a brilliant futureknjaz has a brilliant futureknjaz has a brilliant futureknjaz has a brilliant futureknjaz has a brilliant futureknjaz has a brilliant futureknjaz has a brilliant futureknjaz has a brilliant future
По умолчанию Re: DIALux evo

слудующий релиз - в марте
__________________
Lux ex Machina / UA
knjaz вне форума   Ответить с цитированием
Старый 29.01.2018, 11:27   #383
alkrymov
Высший разум
 
Аватар для alkrymov
 
Регистрация: 06.03.2009
Адрес: Москва
Сообщений: 1,312
Вес репутации: 682
alkrymov has a brilliant futurealkrymov has a brilliant futurealkrymov has a brilliant futurealkrymov has a brilliant futurealkrymov has a brilliant futurealkrymov has a brilliant futurealkrymov has a brilliant futurealkrymov has a brilliant futurealkrymov has a brilliant futurealkrymov has a brilliant futurealkrymov has a brilliant future
По умолчанию Re: DIALux evo

Обещали к концу года Видимо опять к L&B сделают...
__________________
НИТПУ, кафедра Лазерной и Световой Техники

В России уровень маразма, превышает уровень жизни!!!
alkrymov вне форума   Ответить с цитированием
Старый 19.04.2018, 10:58   #384
alkrymov
Высший разум
 
Аватар для alkrymov
 
Регистрация: 06.03.2009
Адрес: Москва
Сообщений: 1,312
Вес репутации: 682
alkrymov has a brilliant futurealkrymov has a brilliant futurealkrymov has a brilliant futurealkrymov has a brilliant futurealkrymov has a brilliant futurealkrymov has a brilliant futurealkrymov has a brilliant futurealkrymov has a brilliant futurealkrymov has a brilliant futurealkrymov has a brilliant futurealkrymov has a brilliant future
По умолчанию Re: DIALux evo

Увидела свет 8-ая версия
Цитата:
We released a new DIALux evo version 8. We wish you lots of fun and success in your lighting planning!

In the following you find an overview of the new features and the improvements in this version:

Bug fixes

• An error has been fixed in the alignment of objects when copying along a line or a curve.
• Typing values in the polygonal line table using “Enter” now works as expected. The focus is now set to the next field.
• An error when moving rotated columns has been fixed.
• An error in scaling of beams has been fixed.
• An error has been fixed for daylight-relevant windows inside of a building.
• The room description is now also included in the outputs of the simple indoor planning.


New Features

• Using of images as planning basis. Supported are * .jpg, * .bmp and * .png files.
• Support also of several raster graphics as planning basis in one project.
• Import Wizard to specify origin and matching size.
• Import of images via drag & drop.
• Import of images from the Windows clipboard, e.g. via the Windows snipping tool.

• The project start "empty rectangular room" has been replaced by the new function "Room planning", which allows the creation of any room shape
• Rooms can now be drawn directly into the CAD. The outer contours are generated automatically.
• When outer contours of different rooms touch, a new outer contour is automatically generated.

• When entering polygonal lines, the lengths of the individual line is now displayed as well as the angle between the lines.
• Lengths and angles of polygonal lines can be entered directly via the TAB-key.
• Entered values are blocked for mouse input, which is indicated by a small lock-symbol.
• When scaling objects the new lengths can be entered directly via the TAB-key

• All objects can be set to the center of a room or an area via the context menu
• Each room, floor, building and terrain view has its own coordinate system.
• These coordinate systems can be positioned and oriented by the user.
• All positions and rotations of objects are related to these coordinate systems.
• In the luminaire tool the luminaire efficiency and the luminous efficacy are additionally specified for the lighting data.
• In the luminaire tool a summary of the photometric data is displayed for luminaires with more than one light emitting surface.
• The north orientation is displayed in 3D and 2D with a small preview at the bottom right for each room, floor, building and terrain view.
• The appearance of the north orientation can be shown or hidden in the view options.

Improvements

• The standard database was updated to EN 12464-1: 2011 and EN 12464-2: 2014
• The point grid for calculation areas has been revised. Each raster is calculated strictly according to EN 12464-1 and -2
• The manual is no longer available for DIALux evo. Alternatively there are more up-to-date online resources for this.
• The nodes in the output tree with the room names are sorted alphabetically.
• The drawing of a coordinate system is available on the top of the CAD window.
• The behavior of polygonal lines and building contours has been revised.
• The behavior of the table for polygonal lines has been revised.
• The minimum size of calculation areas has been adjusted.
• Measurement files from daylight-guided-light systems (DDLS) can now be send to DIALux evo by drag & drop.
• Luminaires in the road-lighting can now also be deleted via the context menu.
• In the planning results of the road-lighting, in addition to the main Arrangement, the secondary arrangements are displayed
__________________
НИТПУ, кафедра Лазерной и Световой Техники

В России уровень маразма, превышает уровень жизни!!!
alkrymov вне форума   Ответить с цитированием
Старый 19.04.2018, 12:34   #385
govoruhin87
Гуру
 
Регистрация: 21.09.2009
Адрес: Челябинск
Сообщений: 351
Вес репутации: 236
govoruhin87 is a splendid one to beholdgovoruhin87 is a splendid one to beholdgovoruhin87 is a splendid one to beholdgovoruhin87 is a splendid one to beholdgovoruhin87 is a splendid one to beholdgovoruhin87 is a splendid one to beholdgovoruhin87 is a splendid one to beholdgovoruhin87 is a splendid one to beholdgovoruhin87 is a splendid one to beholdgovoruhin87 is a splendid one to beholdgovoruhin87 is a splendid one to behold
По умолчанию Re: DIALux evo

Добрый день! Вопрос по EVO 8: Кто подробно работал с "Планировка здания и внешнего пространства", возможно ли, если да то как сделать при постройке здания:
1. Поменять этажи местами.
2. Удалить этаж не самый верхний, а скажем средний.
3. Изменить уровни/отметки этажей (к примеру сделать подвальное помещение на минусовой отметке).

Последний раз редактировалось govoruhin87; 19.04.2018 в 12:36.
govoruhin87 вне форума   Ответить с цитированием
Старый 22.04.2018, 12:33   #386
Daniil0076
Новичок
 
Регистрация: 22.04.2018
Сообщений: 1
Вес репутации: 0
Daniil0076 нет репутации
По умолчанию Re: DIALux evo

Добрый день

Помогите пожалуйста

Компьютер слабенький, все что можно было сделать по максимуму сделал.
Появились проблемы с выводом отчета в pdf

Прошу сформируйте pdf со всеми галочками во вкладке вывода выбранных данных
[Только зарегистрированные пользователи могут видеть ссылки. Регистрация!]
Изображения
Тип файла: png Снимок.PNG (103.7 Кб, 10 просмотров)
Daniil0076 вне форума   Ответить с цитированием
Старый 23.04.2018, 12:58   #387
govoruhin87
Гуру
 
Регистрация: 21.09.2009
Адрес: Челябинск
Сообщений: 351
Вес репутации: 236
govoruhin87 is a splendid one to beholdgovoruhin87 is a splendid one to beholdgovoruhin87 is a splendid one to beholdgovoruhin87 is a splendid one to beholdgovoruhin87 is a splendid one to beholdgovoruhin87 is a splendid one to beholdgovoruhin87 is a splendid one to beholdgovoruhin87 is a splendid one to beholdgovoruhin87 is a splendid one to beholdgovoruhin87 is a splendid one to beholdgovoruhin87 is a splendid one to behold
По умолчанию Re: DIALux evo

Цитата:
Сообщение от Daniil0076 Посмотреть сообщение
Добрый день

Помогите пожалуйста
По ссылке - [Только зарегистрированные пользователи могут видеть ссылки. Регистрация!]
Зачем 1000лк в цеху?Oo

Последний раз редактировалось govoruhin87; 23.04.2018 в 13:01.
govoruhin87 вне форума   Ответить с цитированием
Старый 29.05.2018, 12:42   #388
pirotexnik
Мастер
 
Регистрация: 03.05.2011
Адрес: Санкт-Петербург
Сообщений: 88
Вес репутации: 0
pirotexnik нет репутации
По умолчанию Re: DIALux evo

Всем доброго времени суток!
Кто-нибудь знает - как в DIALux создать участок улично-дорожной сети (основная улица с перекрестком, "карманы" и заезды во дворы)? Чтобы целиком для всей этой "сцены" можно было рассчитать нормируемые показатели для дорог.

Или в DIALux можно только упражняться со стандартными прямыми участками? Один участок - одна улица/дорога.
pirotexnik вне форума   Ответить с цитированием
Старый 29.05.2018, 23:51   #389
knjaz
Мастер
 
Регистрация: 22.12.2007
Адрес: Тернополь, Украина
Сообщений: 238
Вес репутации: 460
knjaz has a brilliant futureknjaz has a brilliant futureknjaz has a brilliant futureknjaz has a brilliant futureknjaz has a brilliant futureknjaz has a brilliant futureknjaz has a brilliant futureknjaz has a brilliant futureknjaz has a brilliant futureknjaz has a brilliant futureknjaz has a brilliant future
По умолчанию Re: DIALux evo

Можно ли каким-то образом импортировать в Dialux светильники по заданным координатам и углам (из таблицы)? Aka быстрое воссоздание проекта.
p.s. Как в AGI32 - [Только зарегистрированные пользователи могут видеть ссылки. Регистрация!]
__________________
Lux ex Machina / UA

Последний раз редактировалось knjaz; 29.05.2018 в 23:56.
knjaz вне форума   Ответить с цитированием
Старый 30.05.2018, 00:52   #390
Gades
GOD
 
Аватар для Gades
 
Регистрация: 26.12.2011
Адрес: Санкт-Петербург
Сообщений: 2,613
Вес репутации: 1389
Gades has a reputation beyond reputeGades has a reputation beyond reputeGades has a reputation beyond reputeGades has a reputation beyond reputeGades has a reputation beyond reputeGades has a reputation beyond reputeGades has a reputation beyond reputeGades has a reputation beyond reputeGades has a reputation beyond reputeGades has a reputation beyond reputeGades has a reputation beyond repute
По умолчанию Re: DIALux evo

Цитата:
Сообщение от pirotexnik Посмотреть сообщение
Всем доброго времени суток!
Кто-нибудь знает - как в DIALux создать участок улично-дорожной сети (основная улица с перекрестком, "карманы" и заезды во дворы)? Чтобы целиком для всей этой "сцены" можно было рассчитать нормируемые показатели для дорог.

Или в DIALux можно только упражняться со стандартными прямыми участками? Один участок - одна улица/дорога.
Вроде [Только зарегистрированные пользователи могут видеть ссылки. Регистрация!] можно было что-то такое... Но это не точно )
__________________
Проект "Люмика"
Gades вне форума   Ответить с цитированием
Ответ

Опции темы
Опции просмотра

Ваши права в разделе
Вы не можете создавать новые темы
Вы не можете отвечать в темах
Вы не можете прикреплять вложения
Вы не можете редактировать свои сообщения

BB коды Вкл.
Смайлы Вкл.
[IMG] код Вкл.
HTML код Выкл.

Быстрый переход


Текущее время: 08:13. Часовой пояс GMT +4.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, vBulletin Solutions, Inc. Перевод: zCarot
http://www.expertunion.ru