DIALux 4.X.X.X - Форум - светотехника, светодизайн, светодиоды, лампы, светильники, электрика

eis · 01.04.2010, 10:07

Цитата:

Сообщение от KALAN

Увлекательная программа ДИАЛ. Иногда бывает круче "стрелялок"....
Более или мене удобный инструмент и ВСЕ!

ПРАВДУ глаголишь, Петрович!!!
100 % согласен.

Поэтому не верю в результат, который представлен на градациях серого.
Очень ровное пятно, а я там прожекторов насувал как вдоль пятна, так и поперек. Должны быть рваные края, как на фиктивных цветах. ПО ИНТУИНЦИИ, а их нет

Ой ДИАД, ДИАЛ...

camii dobrii · 01.04.2010, 15:14

Цитата:

Сообщение от eis

ПРАВДУ глаголишь, Петрович!!!
100 % согласен.

Поэтому не верю в результат, который представлен на градациях серого.
Очень ровное пятно, а я там прожекторов насувал как вдоль пятна, так и поперек. Должны быть рваные края, как на фиктивных цветах. ПО ИНТУИНЦИИ, а их нет

Ой ДИАД, ДИАЛ...

Здесь поможет только настройка растра... Предлагаю ввести расчетные плоскости и побаловаться с их растром. Настройка растра осуществляется в меню отчета.

Bomzh · 20.05.2010, 12:23

Вышла новая версия - [Только зарегистрированные пользователи могут видеть ссылки. Регистрация!]
Изменения пока не известны, но уже доступна для скачивания.

За своевременное обнаружение спасибо пользователю [Только зарегистрированные пользователи могут видеть ссылки. Регистрация!]

alkrymov · 20.05.2010, 14:16

Спасибо. Обновляемся

DIALux 4.8
Innovations:

* The new specifications for the calculation of the energy demand of lighting according to the EnEV2009 are now completely integrated in DIALux. As always DIALux is up to date with the latest regulations.
* DIALux has been completely adapted to the handling of absolute photometry. The North American Standard IES LM 79 gives guidelines for the handling and photometric testing of SLL luminaires (Solid State Lighting / LED Fixtures). To do a correct interpretation and documentation in DIALux has been one of the mayor changes of this version. It is therefore maintain that DIALux is 100% LED compatible.
* DIALux is completely adapted to the handling of the new Lamp PlugIns. Since Light and Building the OSRAM Lamp PlugIn is available. The Lighting designer is now able to select suitable lamps. Having a complete luminaire catalogue (PlugIn) the luminaire defines which lamp suits into the fixture. The lighting designer is able to select those lamps that perfectly fit to the demands the project defines, maybe it’s the luminous flux, the colour of light, the colour rendering, the beam angle or the maintenance factor.
* The possibility to make an optimization for the road lighting arrangement in regard of pole distance, pole height, type of fixture or something else is one of the key features of DIALux road lighting. This feature has now been expanded to the specific Danish and South African Standards (SANS). DIALux is continuously adapted to the needs of international and national standards.

Optimization:

* Again some improvements in the conversion of metric and imperial units. (ft <-> m and fc <-> lx)
* Using a big number of ground elements in a lighting design of an exterior scene a memory leak could appear. This has been fixed now.
* If a huge number of surfaces have been selected for generating out prints also a memory leak could appear. Also this has been fixed now.
* Several smaller bug fixes and adjustments

20.05.2010, 12:23	#3
Bomzh Оракул Регистрация: 24.01.2008 Адрес: Харьков Сообщений: 684 Вес репутации: 642	Ответ: DIALux 4.X.X.X Вышла новая версия - [Только зарегистрированные пользователи могут видеть ссылки. Регистрация!] Изменения пока не известны, но уже доступна для скачивания. За своевременное обнаружение спасибо пользователю [Только зарегистрированные пользователи могут видеть ссылки. Регистрация!] __________________ Feci quod potui, faciant meliora potente

20.05.2010, 14:16	#4
alkrymov Высший разум Регистрация: 06.03.2009 Адрес: Москва Сообщений: 1,312 Вес репутации: 683	Ответ: DIALux 4.X.X.X Спасибо. Обновляемся DIALux 4.8 Innovations: * The new specifications for the calculation of the energy demand of lighting according to the EnEV2009 are now completely integrated in DIALux. As always DIALux is up to date with the latest regulations. * DIALux has been completely adapted to the handling of absolute photometry. The North American Standard IES LM 79 gives guidelines for the handling and photometric testing of SLL luminaires (Solid State Lighting / LED Fixtures). To do a correct interpretation and documentation in DIALux has been one of the mayor changes of this version. It is therefore maintain that DIALux is 100% LED compatible. * DIALux is completely adapted to the handling of the new Lamp PlugIns. Since Light and Building the OSRAM Lamp PlugIn is available. The Lighting designer is now able to select suitable lamps. Having a complete luminaire catalogue (PlugIn) the luminaire defines which lamp suits into the fixture. The lighting designer is able to select those lamps that perfectly fit to the demands the project defines, maybe it’s the luminous flux, the colour of light, the colour rendering, the beam angle or the maintenance factor. * The possibility to make an optimization for the road lighting arrangement in regard of pole distance, pole height, type of fixture or something else is one of the key features of DIALux road lighting. This feature has now been expanded to the specific Danish and South African Standards (SANS). DIALux is continuously adapted to the needs of international and national standards. Optimization: * Again some improvements in the conversion of metric and imperial units. (ft <-> m and fc <-> lx) * Using a big number of ground elements in a lighting design of an exterior scene a memory leak could appear. This has been fixed now. * If a huge number of surfaces have been selected for generating out prints also a memory leak could appear. Also this has been fixed now. * Several smaller bug fixes and adjustments __________________ НИТПУ, кафедра Лазерной и Световой Техники В России уровень маразма, превышает уровень жизни!!!